Interrupt clear bits
CH3_TX_END | Set this bit to clear theCH3_TX_END_INT interrupt. |
CH1_TX_END | Set this bit to clear theCH1_TX_END_INT interrupt. |
CH0_TX_END | Set this bit to clear theCH0_TX_END_INT interrupt. |
CH2_TX_END | Set this bit to clear theCH2_TX_END_INT interrupt. |
CH0_TX_ERR | Set this bit to clear theCH0_ERR_INT interrupt. |
CH1_TX_ERR | Set this bit to clear theCH1_ERR_INT interrupt. |
CH3_TX_ERR | Set this bit to clear theCH3_ERR_INT interrupt. |
CH2_TX_ERR | Set this bit to clear theCH2_ERR_INT interrupt. |
CH0_TX_THR_EVENT | Set this bit to clear theCH0_TX_THR_EVENT_INT interrupt. |
CH1_TX_THR_EVENT | Set this bit to clear theCH1_TX_THR_EVENT_INT interrupt. |
CH2_TX_THR_EVENT | Set this bit to clear theCH2_TX_THR_EVENT_INT interrupt. |
CH3_TX_THR_EVENT | Set this bit to clear theCH3_TX_THR_EVENT_INT interrupt. |
CH3_TX_LOOP | Set this bit to clear theCH3_TX_LOOP_INT interrupt. |
CH2_TX_LOOP | Set this bit to clear theCH2_TX_LOOP_INT interrupt. |
CH0_TX_LOOP | Set this bit to clear theCH0_TX_LOOP_INT interrupt. |
CH1_TX_LOOP | Set this bit to clear theCH1_TX_LOOP_INT interrupt. |
CH5_RX_END | Set this bit to clear theCH4_RX_END_INT interrupt. |
CH4_RX_END | Set this bit to clear theCH4_RX_END_INT interrupt. |
CH7_RX_END | Set this bit to clear theCH4_RX_END_INT interrupt. |
CH6_RX_END | Set this bit to clear theCH4_RX_END_INT interrupt. |
CH4_RX_ERR | Set this bit to clear theCH4_ERR_INT interrupt. |
CH5_RX_ERR | Set this bit to clear theCH4_ERR_INT interrupt. |
CH6_RX_ERR | Set this bit to clear theCH4_ERR_INT interrupt. |
CH7_RX_ERR | Set this bit to clear theCH4_ERR_INT interrupt. |
CH5_RX_THR_EVENT | Set this bit to clear theCH4_RX_THR_EVENT_INT interrupt. |
CH4_RX_THR_EVENT | Set this bit to clear theCH4_RX_THR_EVENT_INT interrupt. |
CH6_RX_THR_EVENT | Set this bit to clear theCH4_RX_THR_EVENT_INT interrupt. |
CH7_RX_THR_EVENT | Set this bit to clear theCH4_RX_THR_EVENT_INT interrupt. |
TX_CH3_DMA_ACCESS_FAIL | Set this bit to clear the CH3_DMA_ACCESS_FAIL_INT interrupt. |
RX_CH7_DMA_ACCESS_FAIL | Set this bit to clear the CH7_DMA_ACCESS_FAIL_INT interrupt. |